Thread: Spotmau 2010

quite a few in the geeks forum mention this:

“Modifying HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\Curr entVersion\Policies\Explorer to 91 (hex) worked for me.”

but I do not have that folder in registry? I have up to current ver, then nothing.

Originally Posted by simrick

Time for a reinstall, if you ask me.....and don't put this program back on!

sadly, at present, thats out of the question. Reinstall, easy enough, will delete all HDD and zillions of files and images.

Originally Posted by simrick

uh, sounds like a "backup time" and then reinstall, if you ask me.......

But try this first:

http://www.microsoft.com/Downloads/d...displaylang=en

Good luck!

bump......

Originally Posted by red devil

i have a backup device, a 500GB HDD on a SATA docking port

checking link as we speak

edit: downloaded and ran. Checks all read OK; but when I told it to access C Drive, program folded.

Oh boy.....okay, I know this is a stupid question, but have you tried this?
Change AutoPlay settings

and here is W7, but it's basically the same as Vista
How enable the dialog box when a cd or a removable disk is inserted?

I am just wondering, if these don't work, maybe you should go into device manager and delete your CD drive. Then let the new hardware wizard find it and install it again?

both negative. it says all is ok, but it isn't

Originally Posted by red devil

both negative. it says all is ok, but it isn't

and you did this too, right?

start>run>regedit

Navigate to the following subkey: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Servic es\CDRom

Look down the list of option in the Right Hand pane of the Registry editor Window and locate the AutoRun option

If the AutoRun value is 1 (one) then AutoRun is enabled. If it is 0 (zero) then it is disabled. To re-enable it, Right Click on the AutoRun option, Select Modify and in the Value Data box type: 1 (one), then Press OK

Shell Hardware is ticked and running in msconfig

regedit: autorun 0,000000001 (1) settings already on enable.
default: value not set